SIMPLEX model isolation

Separating agent for 3D printed models

SIMPLEX model isolation* is a model separating agent that is adapted for use with 3D printed models. With the ready to use separating agent, orthodontic appliances can be easily fabricated from dental resin on the printed model. An even, ultra-fine film of isolating agent is applied on the surface of the model using a brush. This results in a clear separation between the model and the dental resin. After polymerization, the workpiece can be easily removed from the model, maintaining all surface details.

Advantages

  • Adapted for use with 3D printed filament models, designed for the isolation of models when producing removable orthodontic appliances.
  • Also suitable for models fabricated using SLA/DLP printing processes.
  • A single application is sufficient to obtain an optimal separation between the model and the workpiece.
  • It can be completely removed with water and requires no steam cleaning, for easy, material-friendly application.

* Not available in the USA and Canada 

Details

  • Does not contain substances that are harmful to health.
  • Perfect isolation.
  • Optimal, ultra-fine isolating film.
  • Fully dissolvable with water.
  • Gentle on material.

SIMPLEX model isolation

Item number 17350010
Description:

The separating agent for 3D printed models ensures optimal isolation of dental resin from model resin.

Scope of delivery:
80 gr / 2.82 oz.

SIMPLEX with Wifi

Item number 17350000
Scope of delivery:
SIMPLEX 3D filament printer incl. SIMPLEX sliceware, SIMPLEX print, filament sensor, building chamber cover with fan, lockable Plexiglas door with lock and key, SIMPLEX study model filament, USB stick, filament roll holder, Bowden system (filament guiding tube), service set, mains cable with protective plug, travel adapter, USB A-B cable, SIMPLEX level gauge 0.25 mm, operating instructions

SIMPLEX

Item number 17351000
Scope of delivery:
SIMPLEX 3D filament printer incl. SIMPLEX sliceware, SIMPLEX print, filament sensor, building chamber cover with fan, lockable Plexiglas door with lock and key, SIMPLEX study model 2 filament, USB stick, filament roll holder, Bowden system (filament guiding tube), service set, mains cable with protective plug, travel adapter, USB A-B cable, SIMPLEX level gauge 0.25 mm, operating instructions

SIMPLEX model designer

Item number 17350050
Description:

The SIMPLEX model designer transforms the dataset from the intraoral scanner into a print-ready model. Thanks to a structured approach the software ensures that nothing is forgotten or done incorrectly during model fabrication. It can be used as an optional extra to complement the SIMPLEX 3D filament printer system or as a stand-alone solution.

Scope of delivery:
Download link, USB dongle for Microsoft Windows 10/11.

SIMPLEX aligner model 2

Item number 17350320
Description:

The special SIMPLEX aligner model 2 filament is tailored to aligner fabrication and to applications in the thermoforming technique*. It promotes a pleasant working environment, as it is free from irritants and does not release any unpleasant or harmful vapors during the printing process. No post-processing or curing is required. Important note: SIMPLEX sliceware version ≥ 1.1.3 is required for use in the SIMPLEX 3D filament printer system.

* For thermoforming foils with a foil thickness of ≤ 1.0 mm; excluded: Zendura Clear Aligner & Retainer Material

Scope of delivery:
Heat-resistant special filament Ø 1.75 mm, 1 x 1000 g (35.27 oz.), light gray Printing temperature: 230 – 255°C / 446 – 491°F, Print bed temperature: 60 – 80°C / 140 – 176°F SIMPLEX Operating temperature: TEMP 2

SIMPLEX multi-use model 2

Item number 17350610
Description:

The bio filament SIMPLEX multi-use model 2 features an innovative formulation with anhydride components, providing better performance compared to plaster-like filaments. The result is precise planning and diagnostic models with silky matt surface and high detail reproduction. It complies with the ISO 5425 norm. The filament is free from irritants, releases no unpleasant or harmful vapors during the printing process, and is both recyclable and industrially compostable. In addition, it can be optimally worked with rotary instruments or scalpels. Important note: SIMPLEX sliceware version ≥ 1.1.3 is required for use in the SIMPLEX 3D filament printer system.

Scope of delivery:
Filament with anhydride components Ø 1.75 mm, 1 x 1000 g (35.27 oz.), off-white Printing temperature: 200 –220°C / 392 – 428°F, Print bed temperature: 55 – 65°C / 131 – 149°F SIMPLEX Operating temperature: TEMP 1

SIMPLEX study model 2

Item number 17350110
Description:

The bio filament SIMPLEX study model 2 for the production of planning and diagnostic models complies with the ISO 5425 norm and features high detail reproduction and sharpness. It is free from irritants, does not produce any unpleasant or harmful vapors during the printing process, and is both recyclable and industrially compostable. Important note: SIMPLEX sliceware version ≥ 1.1.3 is required for use in the SIMPLEX 3D filament printer system.

Scope of delivery:
Bio filament Ø 1.75 mm, 1 x 1000 g (35.27 oz.), polar white Printing temperature: 190 – 220°C / 374 – 428°F, Print bed temperature: 0 – 60°C / 32 – 140°F SIMPLEX Operating temperature: TEMP 1

SIMPLEX working model 2

Item number 17350210
Description:

The bio filament SIMPLEX working model 2 is specially designed for the digital 3D printing of working models in the orthodontic field, offers high detail reproduction. and complies with the ISO 5425 norm. It is free from irritants, contributing to a pleasant working environment. No unpleasant or harmful vapors are released during the printing process. The filament is recyclable and industrially biodegradable. Important note: SIMPLEX sliceware version ≥ 1.1.3 is required for use in the SIMPLEX 3D filament printer system.

Scope of delivery:
Bio filament Ø 1.75 mm, 1 x 1000 g (35.27 oz.), viridian green Printing temperature: 190 –220°C / 374 – 428°F, Print bed temperature: 0 – 60°C / 32 – 140°F SIMPLEX Operating temperature: TEMP 1
  • Catalogue

    RENFERT_CATALOG_EN.PDF
    PDF (29.53MB)
  • Brochures

    Brochures

    Brochures

    Brochures

    Brochures

    Brochures

    Brochures

    Brochures

    SIMPLEX Brochure
    SIMPLEX_BROCHURE_ZH.PDF
    SIMPLEX_BROCHURE_JA.PDF
    SIMPLEX Brochure_ES
    SIMPLEX Brochure_IT
    SIMPLEX Brochure_PT
    SIMPLEX Brochure_FR
    SIMPLEX Brochure_RU
    PDF (7.03MB)
    PDF (2.68MB)
    PDF (2.74MB)
    PDF (7.04MB)
    PDF (7.04MB)
    PDF (7.04MB)
    PDF (7.04MB)
    PDF (7.26MB)
  • Brochures

    Brochures

    Brochures

    Brochures

    Brochures

    Brochures

    Brochures

    SIMPLEX-MODEL-ISOLATION_FLYER_DE.PDF
    SIMPLEX-MODEL-ISOLATION_FLYER_EN.PDF
    SIMPLEX-MODEL-ISOLATION_FLYER_FR.PDF
    SIMPLEX-MODEL-ISOLATION_FLYER_ES.PDF
    SIMPLEX-MODEL-ISOLATION_FLYER_IT.PDF
    SIMPLEX-MODEL-ISOLATION_FLYER_PT.PDF
    SIMPLEX-MODEL-ISOLATION_FLYER_RU.PDF
    PDF (618KB)
    PDF (617KB)
    PDF (618KB)
    PDF (617KB)
    PDF (617KB)
    PDF (618KB)
    PDF (866KB)
  • Safety data sheet

    Safety data sheet

    Safety data sheet

    Safety data sheet

    Safety data sheet

    Safety data sheet

    Safety data sheet

    Safety data sheet

    Safety data sheet

    Safety data sheet

    Safety data sheet

    SIMPLEX model isolation 17350010 DE
    SIMPLEX model isolation 17350010 EN
    SIMPLEX model isolation 17350010 PL
    SIMPLEX model isolation 17350010 SV
    SIMPLEX model isolation 17350010 NO
    SIMPLEX model isolation 17350010 FI
    SIMPLEX model isolation 17350010 FR
    SIMPLEX model isolation 17350010 ES
    SIMPLEX model isolation 17350010 IT
    SIMPLEX model isolation 17350010 PT
    SIMPLEX model isolation 17350010 RU
    PDF (770KB)
    PDF (767KB)
    PDF (799KB)
    PDF (767KB)
    PDF (769KB)
    PDF (765KB)
    PDF (770KB)
    PDF (767KB)
    PDF (764KB)
    PDF (768KB)
    PDF (816KB)
  • Instruction manual

    SIMPLEX_MODEL_ISOLATION_ANLEITUNG.PDF
    PDF (1.7MB)
    Multilingual

{- title -}

{- text -}

Show external content

To display this content, you must explicitly agree to the loading of „External content“.